Technology - FL7102 - USB3.1 Type-C PD3.0 Controller


USB3.1 Type-C PD3.0 Controller in Devices

The FL7102 is a highly integrated PD controller for the emerging USB 3.1 Type-C connector. It is an advanced Type-C Power Delivery controller which supports PD 3.0.  The FL7102-2Q0 supports two PD ports and the FL7102-2L0 supports one PD port.  They feature an integrated Aux switch, the Billboard device, Vconn switch, and support the TCPC specification in a single chip. They can be configured as DFP, UFP or DRP for various applications.


  • Small Package: QFN 40 and QFN 32 Packages
  • PD 3.0 Support for up to two Type-C ports
  • UCSI (USB Type-C Connector System Software Interface)
  • TCPC (Type-C Port Controller Interface Specification)
  • Fast Role Swap support
  • VCONN Power Switch
  • Integrated LDO Regulator
  • 3V I/O Voltage
  • Low Operating Power and low standby power
  • Low Power Consumption when the Type-C is disconnected (<100uA)
  • Embedded EEPROM for customization and Firmware
  • Flexible GPIO with UART support
  • MCU for autonomous operation
  • I2C or SPI Interface for TCPC messaging
  • I2C & GPIO interface for PD Power Supply control
  • Support for Type-C Audio and Debug Accessories
  • Dead battery support
  • Firmware programmable for DFP, UFP or DRP
  • In-system firmware updates over USB
  • Support for 12MHz or 24MHz crystal