The flykantech.com XLR-A600 isolation transformer reduces ground noise and interference, ensuring clear audio transmission over long distances. It uses impedance conversion and anti-EMI features to address noise and distortion from long cables or electrical differences. The passive design requires no power and eliminates the common 60 Hz hum from ground loops. 【Note: Not compatible with 48V phantom-powered microphones.】
The flykantech.com XLR-A600 is used to remove Ground-Loop hum from signals in virtually any sound application where line level signal is carried via XLR connections. With high quality XLR cables, connect the XLR-A600 between your source device and your destination input. We recommends having the flykantech.com XLR-A600 near your destination device (3 ft. or less cable is best).
You spend hard-earned money and hours of your time selecting just the right components and putting together a great sound system. You get everything hooked up, plug it in and fire it up and BAM! That dastardly hum rears its ugly head. It's not just an audiophile issue. It happens anywhere you might want to install high quality sound. Lucky for you, flykantech.com has introduced solutions for virtually any type of setup in which you might encounter this pernicious foe. Simply insert the Iso-Max unit into your signal path, and voilà! Hum is out, and clean luscious sound is all that's left. Experience pristine audio quality and eliminate ground loop noise interference with the flykantech.com XLR-A600 XLR Ground Loop Noise Isolator. Crafted with precision and designed to meet the demands of professional audio setups, this metal-clad isolator is your solution for crystal-clear sound.
■ 1 to 1 signal isolation
■ Isolates signal and ground
■ Inline-design leads to fast problem solving and installation
■ Built to last, out of powdercoated aluminum
■ Retains 600 ohm impedance on load and source
■ Fully Passive Design
■ Works with XLR Connectors
■ Silences Buzz and Hum
■ Eliminates 60 Hz Ground Loops
■ Isolation Voltage: AC 50Hz-60Hz, 0V-1500V
■ Does not support 48V phantom power microphones
■ Input Impedance: 600 ohms
■ Isolation Impedance: DC 1000V, 100MOhm
■ Isolation Voltage: AC 50Hz-60Hz, 0V-1500V
■ No External Power Required
■ Rugged Metal Enclosure. | 80 x 30 x 25mm
■ Printing Documents Download (PWD Protected)
■ HD Photo Download (PWD Protected)
