PCIE-CV410 | PCIe DisplayPort Alt-Mode Host Card – Dual USB-C 10Gbps Interfaces

The flykantech.com PCIE-CV410 Fusionlink PCIe USB-C Video Output Converter Card is designed for desktop PCs and workstations, bringing high-speed USB-C connectivity and 4K video output to traditional systems. Simply install it into a PCIe slot on the motherboard, and your existing PC can be easily upgraded to meet the demands of modern peripherals. The card is equipped with two USB-C ports: one 10Gbps high-speed data port for external SSDs, hard drives, or card readers, and another port that supports both 4K/60Hz video output and 10Gbps data transfer. With a USB-C monitor or docking station, users can enjoy a single-cable solution, combining high-quality video with fast data transmission while keeping the workspace clutter-free.

For display compatibility, the card features a miniDP 1.4 input, which converts the DisplayPort signal from a graphics card into USB-C DisplayPort Alt Mode, enabling direct connection to USB-C monitors. Whether for single or multi-display setups, the card delivers seamless performance. With support for PCIe x4/x8/x16 high-speed bandwidth, this expansion card ensures stable data transfer and reliable video output. It is particularly suitable for creative professionals such as designers, video editors, and 3D rendering engineers, as well as for researchers and enterprise laboratories that require expanded peripheral compatibility. For DIY PC builders and enthusiasts, it provides an easy way to give older platforms the benefits of modern USB-C efficiency.

■ Dual USB-C ports: 10Gbps data + 4K/60Hz video with data
■ miniDP 1.4 input for USB-C DisplayPort Alt Mode
■ 4K/60Hz video output for sharp and smooth display
■ 10Gbps high-speed data transfer for SSDs and storage
■ PCIe x4/x8/x16 slot compatibility
■ One-cable solution for video + data via USB-C monitor/doc
■ Compatible with Windows, Linux

■ Hardware
BUS: PCI Express Spec 3.0 x2 (compatible with x4/x8/x16 slot)
Controller: PCI Express USB 3.2 Gen2
USB Standard: eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ & IO: Assigned by system

■ USB Communication
Interface: USB 3.2 Gen2 / Gen1 / 2.0 / 1.1
Speed: 10Gbps, 5Gbps, 480Mbps, 12Mbps, 1.5Mbps

■ Ports: 2
PCB Connector: USB 3.1 Type-C (Downstream Facing Port)
Protection: ±15KV IEC61000-4-2 Air Gap, ±8KV Contact Discharge

■ Video / Audio
Input: Standard DisplayPort Female, Ver1.4/1.2
Output: USB Type-C port
Audio: Yes (pass-through)

■ Power
Source: PCI Express Bus Power
Output Capacity: USB Type-C Port: 5V / 1.5A per port (total limited by system PSU)
Over Current Protection: 5V / 1.5A per port / Power Switch
Power Consumption: 3.0W @ 3.3V (board only, without USB device load)
Driver Support: Windows 8.x / 10 (x86/x64) / 11 (in-box driver)

■ Environment
Operating Temperature: 0–60°C (32–140°F)
Operating Humidity: 5–95% RH
Storage Temperature: -20–70°C (-4–158°F)

■ Physical Characteristics
PCB Dimension: 80 x 57 x 120mm / 80 x 57 x 80mm
Bracket: Standard 120 mm (Low Profile 80 mm - Optional)

■ PCIE-CV410 Data Shet | English | PDF |